Features:
- Compatible with all sonsorless brushless motor.
- Use top quality electronic components to enhance the current endurance ability of the ESC.
- Excellent start-up, acceleration and linearity features.
- With 3 running modes: Racing mode (Forward), Forward/Backward mode and Rock Crawler mode.
- With 4 steps of maximum reverse force adjustment.
- Proportional ABS brake function with 4 steps of maximum brake force adjustment, 8 steps of drag-brake force adjustment and 4 steps of initial brake force adjustment.
- With 9 start modes (Also called "Punch" ) from "Soft" to "Very aggressive" to suitable for different tracks.
- Multiple protection features: Low voltage cut-off protection for lithium or nickel battery / Over-heat protection / Throttle signal loss protection / Motor blocked protection.
- With 8 steps of timing adjustment to get the best compatibility with various of motors.
- Easily program with only one button and compatible with pocket-sized program card.
- The ESC is USB supported. The firmware of the ESC can be updated through an USB adapter on the Advanced LCD Program Box (Optional device).
- Top quality motor: Aluminium shell (case), High quality magnets, Copper wires of high temperature endurance, Good quality bearings
EZRUN-35A-SL
Specification
- Output: Continuous current 35A, burst current 190A.
- Input: 4-9 cells NiMH/NiCd or 2-3 cells LiPo.
- BEC Output: 6V/1.5A.
- Resistance: 0.0015 Ohm.
- Motor Supported: Sensorless Brushless Motor
- Suitable Car: 1/12, 1/10 on-road or off-road cars / trucks for normal race or sportful race.
- Size: 31.5 x 27.5 x 24 mm
- Weight: 30g (Without wires)
EZRUN-3650M
Model: 13T/SL-3650M
KV: 3000
Diameter: 35.8 mm
Length: 50 mm (Without Shaft)
Shaft: 3.17 mm
Shaft Length: 15 mm
Weight: 165g
- Size: 88 x 58 x 14 mm
- Weight: 40g.
- Input Voltage: 4.8-6V
This product was added to our catalog on Tuesday 13 July, 2010.
Home
